Electric Shaver Spare Parts

from Spare Parts & Accessories

To help you get the longest possible life from your electric shaver, we make a point of carrying every available spare part for all of the shavers we sell. If you service and repair your electric shaver with our original manufacturer, branded replacement parts, including shaver foils, rotary heads, spares and accessories you can continue to get years of use from your trusty friend.

We're also proud to be the UK authorised service agent for Philips and Braun grooming products, so if you can't see find what you need, we have the knowledge, just contact us and we'll point you in the right direction.

Quickly find replacement parts by model number.

Already know the part code?

6 Item(s)
View per page
Sort by:
6 Item(s)
View per page
Sort by:
Back to top

Replacing your shaver's cutting heads?

Fitting a new foil to your foil based shaver

Replacing the cutting parts on a foil electric shaver is a piece of cake, especially when it comes to newer models where the foil and cutter are combined into a single cutting head cassette. Simply locate the release button on each side of the shaver head and press firmly to release and separate the cartridge from the shaver. Some older models supply their foil and cutter as two independent parts which need to be changed in two steps. First remove the foil, either by pressing the release button (if your shaver has one), or simply by pulling the foil away from the body of the shaver. Removing the foil exposes the blades so take care not to touch them as they will still be sharp enough to cut your fingers. Hold the cutter block at its sides, rotate it 90 degrees counter-clockwise, so it is vertical to the shaver and then just pull it off. To fit the new cutting parts, carry out the same procedure in reverse.

It’s good practice to replace both the foil and cutter at the same time for the optimum performance of your shaver. Having said that, if only the foil is damaged and the cutters are still sharp, you can get away with just replacing the foil. It’s a good idea to check the foil for dents and tears before each shave as exposed blades can cause painful nicks!

Fitting new rotary heads to your rotary based shaver

You replace the blades on rotary shavers in one of two ways, depending on your shaver model. For some you simply disconnect and replace the whole shaver head - easy peasy! The other method, which involves replacing the individual cutters is a bit more tricky, especially on the first time around but once you get the knack it only takes a minute. Press the release key on the front edge of the shaver head and it will flip up and open allowing you to pull the head off the shaver body completely. Once disconnected you are ready to remove the cutters. Depending on the make and model you will either have a combined locking mechanism that locks all of the cutters into the head together or each cutter will be individually locked into place. Either way, twist the locking mechanism anti-clockwise to release and remove and put to one side. The individual cutters are then free to be removed one by one and the new ones slotted into place. Each cutter has 2 dog ears on it with a groove in between them. These have corresponding shapes in the head to fit into, (the groove faces into the centre of the head) so ensure they fit snugly in the right way and lock them back into place. Reconnect the head back onto the shaver body and you’re good to go!