The 10-in-1 Titanium Grooming system combines titanium blade technology with turbo boost power to create an ideal grooming solution
The BaByliss For Men 10-in-1 Titanium Grooming system is a professional grade rechargeable trimmer with titanium blade technology and five interchangeable cutting heads for all over trimming and grooming. Two five-position comb guides offer a variety of cutting lengths (3 to 15 mm) and the taper control provides super fine cut adjustment (0.5 to 1.5 mm), while the turbo boost offers increased power at the touch of a button.
The 10-in-1 All Titanium Grooming system comes with five interchangeable heads. These include a precision trimmer with titanium blade technology for high precision and sharpness, a body groomer, a detail trimmer for creating lines and effects in the hair, a nose and ear trimmer and a foil shaver for a clean, smooth finish.
The BaByliss For Men 10-in-1 Titanium Grooming system comes with two five-position comb guides for cutting lengths from 3 mm to 15 mm (increasing in 3 mm intervals). One of these comb guides is for use with the precision trimmer head and the other is for use with the body groomer head.
Use the longest setting at first, until you become familiar with the adjustment. If you want a shorter cut, you can adjust the comb to a shorter position and go over the hair again until you achieve the desired length.
The taper control with three-position switch (on the rear of the handle) enables super-fine cut adjustment for precision trimming when used with the Precision Trimmer and Body Groomer heads. The trimmer will be set to its shortest cutting length of 0.5 mm with the number three visible below the taper control switch.
To increase the length by 0.5 mm to a cutting length of 1 mm, slide the switch down so two is visible above the taper control switch. To increase the length by a further 0.5 mm to a cutting length of 1.5 mm, slide the switch down so both one and two are visible above the taper control switch.
The Precision Beard Trimmer comes with three different jawline blending combs, in three length settings: 3 mm, 5 mm and 7 mm. If you require more than one cutting length, start with the longest length first. To blend-in a shorter length use a smaller comb.
The 10-in-1 Titanium Grooming system also has a nose and ear hair attachment. It is easy to us - simply insert the trimmer head into your nose or ear and trim the hair by moving the trimmer in a circular motion. The trimmer should only be used at the entrance to the ears or nose. Use any deeper than this can cause injury.
The BaByliss For Men 10-in-1 Titanium Grooming system comes with a storage stand that is able to hold the trimmer and accessories. You will never be caught out with an uncharged trimmer again, thanks to the charging capability of the storage stand. Before using your trimmer for the first time though, you must charge it continuously for 16 hours. This initial super-charge ensures optimum power performance to ensure smooth, fast trimming every time.
To maintain optimum performance, your trimmer should be cleaned after each use. This is as simple as removing and rinsing the comb guides under running water before leaving them to dry thoroughly. Then, remove the cutting head of the trimmer, rinse under running water and dry thoroughly before storage or use.
Periodically, it may be necessary to oil the blades. After cleaning, attach a trimmer head, switch on and oil the blades using a few drops of the lubricating oil supplied. Only use the lubricating oil supplied with the appliance as this is specifically formulated for high speed trimmers and does not evaporate or slow the blades.
BaByliss For Men is manufacturers of electrical male grooming appliances. BaByliss tools are used in hair and beauty salons and BaByliss use this expertise to create top performance products. All BaByliss For Men products are thoroughly tested to give the ideal performance and results at home.